Carpet Protection Film Flame Retardant
Flame Retardant Heavy Duty Carpet Protection Film has been developed to protect carpets in
commercial and public buildings under construction and refurbishment. This protection is manufactured
from heavy duty flame retardant polythene film with a special flame retardant low tack adhesive back that
is designed to protect carpets on a temporary basis for up to 4 weeks.
Ockwells Flame Retardant Carpet Protection Film can be safely used on steps and stairs to avoid trip hazards unlike the traditional method of using dust sheets.
Ockwells Flame Retardant Carpet Protection Film has been tested to:
• BS476 : part 12: 1991 - Method of testing for ignitability of products by direct flame impingement. WF Report No. 169160 Dated 4th January 2008.
Ad-Hoc Test procedure to determine the flamability of a temporary protective covering when it is subject to flame attack from ignition sourse “crib number7” defined in BS5852 : 1990. WF Report No. 169162 Daterd 21st January 2008
• BS 4791 : 1987 - Method for determination of the effects of ignition on textile floor covering. WF Report No. 167817 Dated 21st November 2007.
• BS EN ISO 4589-2 : 1999 - Determination of burning behaviour by oxygen index. WF Report No.. 169161 Dated 19th December 2007.
• PR EN 2824 : PR EN 2825 PR EN 2826 - Burning bahaviour, determination of smoke density and gas components in the smoke of mateials under the influence of radiating heat and flames. WF Report No. 169163 Dated 30th January 2008.
Certification for these tests is available for inspection on request.
Available in 2 widths 600mm and 1200mm x 100m rolls.
Ockwells Flame Retardant Self Adhesive Carpet Protection Film should only be used to protect carpets for up to 4 weeks. Before using this product, the purchaser and or user must determine the suitability of this product for its intended use. The purchaser and or user assumes all risk and liability in connection with this product.
Because there are many variations in carpet fibers and installation methods, the purchaser and or user should test the suitability of the carpet protection film in an unexposed area. Leave carpet protection film down for 24 to 48 hours, inspecting for adhesion and appearance.
Carpet protection film is for temporary protection of carpet for up to 4 weeks.
Carpet Protection Film Guidelines
• Carpet protection film is for carpeted surfaces only.
• Do not apply to wet or damp carpet.
• All carpets that are to be protected with carpet protection film should be clean and free from dust, dirt and excessive loose fibres.
• Newly installed carpet should be allowed to ventilate for at lease 48 hours.
• Carpet protection film is not recommended for oriental or antique carpets.
• For use on looped or wool carpets, cover entire carpet - do not use as a runner.
• All loose rugs and doormats should be removed from carpeted areas prior to carpet protection
film being applied.
• Where smooth nosings or carpet plates are used they should first be lined with Ockwells Easi-peel
(easy tear) tape before covering over with carpet film.
• If carpet protection film is to be exposed to temperatures over 95F, direct sunlight or outdoor
exposure, the product should be inspected every 3 days and replaced as needed.
• In extremely heavy traffic conditions such as a parade or home tours, where thousands of people
will be walking on the product, the carpet film should be inspected every 3 days and replaced
after approximately 1,000 or 2,000 people have trafficked the areas or as necessary.
Application Instructions
We recommend that the carpet film dispenser is used for ease of application and to ensure that the film is left smooth and crease free. Applicators are available in 600mm, 900mm and 1200mm wide.
To apply; remove the protective wrap, locate the start of the film, unwind about 300mm of the carpet protection film and place on the carpet, adhesive side down. Apply slight pressure over top of the film while unwinding in the direction you wish to apply. Roll out to desired length and then cut with a sharp knife.
For application instruction using a carpet film dispenser, see the product page for ‘carpet film dispensers’. Please contact one of our sales offices for further information and prices.
