Hardsurface Protection Film Flame Retardant Certified TS63
Ockwells Flame Retardant Hard Surface Protection Film has been developed to protect hard floors in commercial and public
buildings under construction and refurbishment. This protection is manufactured from flame retardant polythene film with a
special low tack adhesive back that is designed to protect hard surfaces on a temporary basis without leaving a residue.
Hard Surface Film Flame Retardant - Certified TS63
Ockwells Flame Retardant Hard Surface Protection Film is a certified product:
Ockwells Flame Retardant Hard Surface Protection Film has shown a fire performance which ensures that when the temporary
protective covering is used on floors, walls, furnishings and both internal and external glazing during building construction or refurbishment, it complies with the stringent guidelines of Warrington Certifire Certification.
• Technical Specification - TS63 Approved Product
• Warrington Certifire Certification - Cert. No. CF 748
• Factory Production and controls certified under ISO 9001:2008
Hard Surface Protection Film Guidelines
• Hard Surface protection film for hard surfaces only.
• Do not apply to wet or damp areas.
• Before film application, floors should be clean and free from dust, dirt and loose debris.
• Hard Surface Protection Film should be replaced every 4 weeks when used on floors, every 24 weeks on internal glass and every 12 weeks on external glass.
• Cover entire surface, do not use as a runner.
• Protect nosings or door plates with Ockwells Easi-peel (easy tear) tape before covering over with film.
Description
Flame Retardant Hard Surface Film 600mm x 100m
Hard Surface Film Dispenser 600mm
Contact one of our sales offices for more information and prices.
